Industrial IoT Wireless Vibration & Temperature Sensor V2 MEMS

Features

  • Industrial Grade 3-axis Vibration Sensor with ±32g Range
  • Calculates RMS, MAX, and MIN g Vibration
  • Noise Removal using Low-pass Filter
  • Frequency Range (Bandwidth) up to 8,000 Hz
  • Sample Rate up to 25,600Hz
  • Time Domain Data for FFT analysis
  • Encrypted Communication with 2 Mile Wireless Range
  • Operating Temperature Range -40 to +85 °C
  • Wall-Mounted or Magnet Mounted IP65 Rated Enclosure
  • Example Software for Visual Studio and LabVIEW
  • Vibration Sensor with External Probe Option
  • Up to 500,000 Transmissions from 4 AA Batteries
  • Many Gateway and Modem Options Available
$ 258.95
In Stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Compare

Description

Industrial IoT Wireless Vibration And Temperature Sensor

Introducing Qatalytic’s Long Range Industrial IoT wireless vibration and temperature sensor, boasting up to a 2 Mile range using a wireless mesh networking architecture. Incorporating a 16-bit Vibration and Temperature sensor, this sensor transmits highly accurate vibration data at user-defined intervals.

During Power-Up, this vibration sensor learns “normal” base-line vibration from the monitored device.  This base-line vibration is subtracted from regular sampled vibration readings to improve relevant vibration data.  Ideally, the monitored device should be off while the sensor is learning.  Once the sensor stabilizes and starts sending data, the device/machinery being monitored can be powered on.

This Industrial IoT wireless vibration sensor samples 3-axis of Vibration data for 900ms and then calculates RMS, Maximum, and Minimum vibration readings. This sensor combines these data with temperature data in a data packet and transmits the result to modems and gateways within the wireless range.  Once the transmission is complete, the vibration sensor goes back to sleep, thus minimizing power consumption.

Powered by just 4 AA batteries and an operational lifetime of 500,000 wireless transmissions, a 10 years battery life can be expected depending on environmental conditions and the data transmission interval.  Optionally, this sensor may be externally powered, making it an ideal choice for wireless vibration monitoring systems for industrial equipment.

With an open communication protocol, this sensor transmits hardware encrypted data that can be integrated with just about any control system or gateway.  Data can be transmitted to a PC, a Raspberry Pi, to Losant IoT cloud, Microsoft® Azure® IoT, and an embedded system all at the same time. Sensor parameters and wireless transmission settings can be changed using our free LabVIEW® monitoring software on a desktop PC.

The long-range, price, accuracy, battery life and security features of Wireless Vibration Sensor makes it an affordable choice which exceeds the requirements for most of the industrial as well as consumer market applications.

General Vibration Guidelines

Here are some recommended Vibration standards, you can compare these readings with our Long Range IoT Wireless Vibration Temperature Sensor to determine if your device is operating properly or if it may require service (note that actual equipment and application may vary):

A. 0.01g or Less — Excellent condition, No action required

B. 0.35g or less — Good Condition, No action required unless the machine is noisy or running at an abnormal temperature

C. 0.5g or less — Fair Condition, No action required unless the machine is noisy or running at an abnormal temperature

D. 0.75g or More— Rough Condition, possible action required if the machine is noisy and also check the bearing temperature

E. 1g or More  — Very Rough Conditions, further analysis and see if it is doing this continuously. Also, check for noise and temperature

F. 1.5g or More — Danger Level, there is definitely a problem in the machine or installation. Also, check the temperature Log

G. 2.5g or More — Shut-down the Machine immediately and look for possible causes. Call a technician for immediate repair

For Heavy Machinery these readings could be 1.5 times to 2 times more than listed above.

Transmission Interval

This device sends data periodically, based on user-preset timing intervals.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the compare bar
Compare
Compare ×
Let's Compare! Continue shopping