No products in the cart.
Showing 1–16 of 24 results
Features
- Industrial Long Range Wireless 3-Channel Thermocouple Sensor
- Industrial Grade with an Accuracy of ±2.2°C
- Three High-Grade K type thermocouple Connectors and Probes
- Up to 500,000 Transmissions from 4 AA Batteries
- 2 Mile Range with On-Board Antenna
- Superior LOS range of up to 28 miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Losant, and More
- Example Software for Visual Studio and LabVIEW®
- LabVIEW® Configuration and Data Logging Software
- Supports Wireless Mesh Networking
- NO Monthly Fee or Locked Proprietary Protocols
Add to Wishlist
Add to Wishlist
Features
- Industrial Long Range Wireless 2-Channel Thermocouple Sensor
- Industrial Grade with an Accuracy of ±2.2°C
- Two High Grade K type thermocouple Connectors and Probes
- Up to 500,000 Transmissions from 4 AA Batteries
- 2 Mile Range with On-Board Antenna
- Superior LOS Range of up to 28 miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Losant and More
- Example Software for Visual Studio and LabVIEW®
- LabVIEW® Configuration and Data Logging Software
- Supports Wireless Mesh Networking
- NO Monthly Fee or Locked Proprietary Protocols
Add to Wishlist
Add to Wishlist
Features
- Industrial Grade Bidirectional Differential Pressure Sensor
- Includes Integrated Temperature Sensor
- Pressure Range of up to ±500 Pa (±2 inch H2O / ±5 mbar)
- Pressure Resolution up to 0.03 Pa
- Lowest Detectable Pressure < 0.02 Pa
- Operating Temperature Range -20° to +85° C
- Temperature Resolution 2°C
- Ideal For Air, N2, O2, Non-Condensing and Inert Gases
- 2 Mile Range with 900MHz On-Board Antenna
- Up to 28 miles LOS Range at 900MHz with High-Gain Antennas
- Interface to Amazon AWS, Losant, Microsoft Azure, and Node-Red
- Example Software for Visual Studio and LabVIEW
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Custom Interfacing Applications
- Secure Transmission using AES-128 Encryption
Add to Wishlist
Add to Wishlist
Features
- Industrial Grade Wireless 2-Channel Current Monitor
- AC Current Range 0-100A RMS Measurement
- Auto Time Delay Based Data Sample Transmission
- Current Change Detection and Transmission
- Configurable Current Change Detection Limits
- Configurable Current Sensor Calibration Over Wireless
- Wall-Mounted or Magnet Mounted IP65 Rated Enclosure
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Superior LOS Range of up to 28 Miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft® Azure®, Losant, and More
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Small 3″ x 3″ Form Factor Wireless IoT Current Sensor
- Power-Efficient Sleep Mode, Up to 10 Year Battery Life
- User Configurable Sleep Duration
- Up to 500,000 Transmissions from 4 AA Batteries
- Includes Battery Level with Every Transmission
- Validates and Retries Lost Communication Packets
Add to Wishlist
Add to Wishlist
Features
- MQTT Gateway for Connection to Qatalytic IoT Sensors
- Plug-and-Play Setup Requires Only WiFi and MQTT Login Credentials
- SoftAP Web-Page Configuration of Gateway and MQTT Settings
- Up to 2-Mile Wireless Range Between IoT Sensors and Gateway
- Up to 10 Meter Wireless Range Between Gateway and WiFi Router
- Encrypted Communications Between IoT Sensors and Gateway
- Encrypted Communications Between Gateway and WiFi Connection
- Encrypted Communications Between Gateway and MQTT
- Automatically Discovers IoT Sensors & Report to MQTT with Zero Setup
- Integrated Web-Page Allows Configuration of Remote IoT Sensors
- Integrated Web-Page Displays Incoming IoT Sensor Data
- Supports DHCP or Static IP Managed Wireless Networks
- Automatically Registers Sensors and Pushes Sensor Data to MQTT
- Compatible with All Qatalytic Wireless IoT Sensors
- Allows Multiple Gateways to Co-Exist for Redundant Data
- Over the Air Firmware Update Support Coming Soon
Add to Wishlist
Add to Wishlist
Features
- 4-Channel 15-Bit Wireless 4-20mA Input endNode with USB
- For Use with Existing Sensors that Already Include a Power Solution
- Long Range Wireless Communications with 128-Bit AES Encryption
- USB Communications Interface with Virtual COM Port Access
- Dual 9-32V DC Power Interface with Power and RGB Status LEDs
- Long Range Wireless Communications up to 2 Miles at 900MHz
- 900MHz, 868MHz and 2.4GHz Wireless Options with Antenna
- Pluggable Connectors for Wireless 4-20mA Input and Power
Add to Wishlist
Add to Wishlist
Features
- Industrial Grade IoT Wireless Modem
- USB, WiFi TCP/IP, WiFi MQTT, Bluetooth
- Supports Virtual COM Port Over USB and Bluetooth
- Supports Basic Authentication MQTT brokers.
- Operating Temperature Range -40 to +85 °C
- 5V-32V DC Input Voltage with Power Supply Included
- Compatible with Qatalytic IoT Sensors and endNodes
- 2 Mile Range with On-Board Antenna
- 900MHz, 2.4GHz, and 868 MHz Options
- Wireless Mesh Networking using DigiMesh®
- Supports 128-Bit AES Wireless Encryption
Add to Wishlist
Add to Wishlist
Features
- Industrial Grade Sensor Long Range Wireless Pressure Temperature Sensor
- Operating Range 0 to 1000psi, -40°C to +85°C (-40°F to 185°F)
- Industry Standard 1/4 inch NPT Male Connector
- Accuracy ±0.5%FS (pressure) ±1.5℃ (Temperature)
- Sampling Frequency 1.5ms
- Long Term Stability: ±0.3%FS/year
- Compatible Media – Gas, Liquid or Vapor
- 2 Mile Range with On-Board Antenna
- Superior LOS range of up to 28 miles with High-Gain Antennas
- Interface to Raspberry Pi, Microsoft Azure, AWS, Arduino and More
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for custom interfacing applications
- IP65 Rated Enclosure
- Improved reliability incorporating Retry feature in case of packet loss
- Real-Time Battery Status
Add to Wishlist
Add to Wishlist
Features
- 4-Channel 15-Bit Wireless 4-20mA Current Loop Input endNode with USB
- Isolated 4-20mA Current Loop Inputs Supply 10V, 16V, or 24V to External Sensors
- Internal Isolated I2C Communications Bus to Reduce Noise Contamination
- Long Range Wireless Communications with 128-Bit AES Encryption
- USB Communications Interface with Virtual COM Port Access
- Dual 9-32V DC Power Interface with Power and RGB Status LEDs
- Long Range Wireless Communications up to 2 Miles at 900MHz
- 900MHz, 868MHz and 2.4GHz Wireless Options with Antenna
- Pluggable Connectors for Wireless 4-20mA Current Loop Input and Power
Add to Wishlist
Add to Wishlist
Features
- IoT Relay Controller endNode with USB and Long Range Wireless
- Includes Four Relays with a 10-Amp Rating per Relay
- Long Range Wireless Communications with 128-Bit AES Encryption
- USB Communications Interface with Virtual COM Port Access
- Dual 9-32V DC Power Interface with Power and RGB Status LEDs
- Long Range Wireless Communications up to 2 Miles at 900MHz
- 900MHz, 868MHz and 2.4GHz Wireless Options with Antenna
- Pluggable Connectors for IoT Relay Controller Connections
Add to Wishlist
Add to Wishlist
Features
- 4-Channel 14-Bit Wireless 4-20mA DC Current Loop Output endNode with USB
- Isolated 4-20mA Current Loop Outputs with a 0-25mA Programmable Range
- Isolated Outputs Allow a Single External Supply to Control All 4-20mA Devices
- Internal Isolated I2C Communications Bus to Reduce Noise Contamination
- Long Range Wireless Communications with 128-Bit AES Encryption
- USB Communications Interface with Virtual COM Port Access
- Dual 9-32V DC Power Interface with Power and RGB Status LEDs
- Long Range Wireless Communications up to 2 Miles at 900MHz
- 900MHz, 868MHz and 2.4GHz Wireless Options with Antenna
- Pluggable Connectors for Wireless 4-20mA Current Loop Output and Power
Add to Wishlist
Add to Wishlist
Features
- Industrial Grade 3-axis Vibration Sensor with ±32g Range
- Calculates RMS, MAX, and MIN g Vibration
- Noise Removal using Low-pass Filter
- Frequency Range (Bandwidth) up to 8,000 Hz
- Sample Rate up to 25,600Hz
- Time Domain Data for FFT analysis
- Encrypted Communication with 2 Mile Wireless Range
- Operating Temperature Range -40 to +85 °C
- Wall-Mounted or Magnet Mounted IP65 Rated Enclosure
- Example Software for Visual Studio and LabVIEW
- Vibration Sensor with External Probe Option
- Up to 500,000 Transmissions from 4 AA Batteries
- Many Gateway and Modem Options Available
Add to Wishlist
Add to Wishlist
Features
- 4-Channel 12-Bit Wireless 0-10V DC Voltage Output endNode with USB
- Source Up to 30mA per Output Channel
- Long Range Wireless Communications with 128-Bit AES Encryption
- USB Communications Interface with Virtual COM Port Access
- Dual 9-32V DC Power Interface with Power and RGB Status LEDs
- Long Range Wireless Communications up to 2 Miles at 900MHz
- 900MHz, 868MHz and 2.4GHz Wireless Options with Antenna
- Pluggable Connectors for Wireless 0-10V Voltage Output and Power
Add to Wishlist
Add to Wishlist
Features
- 4-Channel 12-Bit Wireless 0-10V Input endNode with USB
- Each Analog Input Includes a Dedicated Non-Shared Ground Input
- For Use with Existing Sensors that Already Include a Power Solution
- Long Range Wireless Communications with 128-Bit AES Encryption
- USB Communications Interface with Virtual COM Port Access
- Dual 9-32V DC Power Interface with Power and RGB Status LEDs
- Long Range Wireless Communications up to 2 Miles at 900MHz
- 900MHz, 868MHz and 2.4GHz Wireless Options with Antenna
- Pluggable Connectors for Wireless 0-10V Input and Power
Add to Wishlist
Add to Wishlist
Features
- Wireless Soil Moisture Sensor for Indoor Outdoor Use
- Industrial Grade 1 Channel IoT Soil Moisture Sensor
- 10-bit Resolution ±2 LSB Absolute Accuracy
- Usable ADC Values of 0 (dry) to 830 (wet)
- Auto ADC Sample Transmission on Moisture Level Change
- Configurable 10% Analog Voltage Change Detection
- 2 Mile Line-of-Sight Range with On-Board Antenna
- Probe Does Not Corrode Over Time and Insensitive to Salinity
- Measures Volumetric Water Content (VWC)
- Measures Gravimetric Water Content (GWC)
- Interface to Raspberry Pi, Microsoft® Azure®, Losant, and More
- Example Software for Visual Studio and LabVIEW®
- Wireless Mesh Networking using DigiMesh®
- Open Communication Protocol for Easy Software Integration
- Includes Battery Level with Every Transmission
- Validates and Retries Lost Communication Packets
Add to Wishlist
Add to Wishlist
Features
- Industrial Grade IoT Wireless RS232 Modem
- Standard DB9 R232 Connector
- Connect with PLC, SCADA or any Industrial Computer
- Operating Temperature Range -40 to +85 °C
- 5V-32V DC Input Voltage Range
- Includes Power Supply and Serial Cable
- Works With PC, MAC, Linux and Edge Gateway
- 2 Mile Range with On-Board Antenna
- Interface to Windows, Linux, and Mac Computers
- Connect to Embedded Systems and Industrial Computers
- Wireless Mesh Networking using DigiMesh®
- Includes Power Supply and DB-9 RS-232 Serial Cable
Add to Wishlist
Add to Wishlist